top of page
laser_edited.jpg

Laser Cutting

we just purchased a 6000watt scanning fiber laser with a 60x120 cutting area 

​

GOPR1397.JPG

Waterjet Cutting

Our waterjet has a work envelope of 84 x 156 inches with a cutting capacity of up to 8 inches thick and the machine has glass scales as well as encoders on the drives  capable of holding some of the tightest tolerances available from an abrasive cutting machine this machine is also equipped with a 5-axis cutting head allowing it to cut tapers down to 60 degrees

GOPR1404-1_edited.jpg

Bending- Press Brake

We have a 10 foot 150 ton  6 Axis Trumpf Trumabend V130  outfitted with  a full set of Wila precision ground tooling ready to tackle your toughest bending.
and also a 8 foot  30 ton Niagra pressbrake and a new horizontal forming press

GOPR1408.JPG

Roll Forming

We have a brand new powered roll with a rolling capacity of .187 thick x 60 wide we also have a new angle iron /structural steel roll and multiple other smaller rolls and Hosssfeld style bending equipment to supply most all of your forming needs.

wedlarea_edited.png

Full Welding Department

  1. IPG 2500watt Light weld XR laser welder

  2. Siegmund 48x96 modular welding table

  3. Lincoln 650 AMP dual feed Mig welding station

  4. Fronius Transteel Multiprocess welder

  5. Lincoln 140 Mig 

  6.  350 Amp AC/DC Tig Welder

  7. 50 KVA Spot Welder

GOPR1412.JPG

Metal Shearing

we have a  large mechanical shear with a thickness capacity of .125 and a width capacity of 10 feet

lathe.jpg

Machine Shop

​

  • Series 1 Bridgeport with a 3 axis Proto Trak

  • Series 1 Bridgeport with a 2 axis DRO,

  • 14 x 40 Manual lathe with a 2 axis DRO

  • Flex arm Tapping Machine

  • Pem-serter Pem press

  • large Cleereman power drill

  • a Powermatic 4 head drill with staged Drill, c-sink, and Tapping head setup

bottom of page